Plasma Welding Machines Models

Klein Schweisser 150i 10 PLASMA WELD, 400i 10 PLASMA WELD
 

Details

Klein Schweisser 150i 10 PLASMA WELD

Klein Schweisser 400i 10 PLASMA WELD

 Input supply

220V AC, 1 Phase, 50Hz.

415 V AC, 1 Phase, 50Hz.

 Operating supply voltage range

190Volts A/C to 250Volts A/C.

370Volts A/C to 460Volts A/C.

 Input Power

4.8 KVA at 150 Amps.

10.5 KVA at 400Amps.

 Open circuit voltage ( Main arc )

95 V DC to 105 V DC.

95 V DC to 105 V DC.

 Welding current range

1.0 Amps. DC to 150Amps. DC.

5.0 Amps. DC to 400Amps. DC.

 Welding current control

Stepless with fine control (Digital)

Stepless with fine control (Digital)

 Base current

5 Amps. DC to 150 Amps. DC.

10 Amps. DC to 400Amps. DC.

 Up slope

0 to 10 sec.

0 to 10 sec.

 Down slope

0 to 10 sec.

0 to 10 sec.

 Pulse frequency

1 Hz to 1000 Hz

1 Hz to 1000 Hz

 Pulse on time

10 % to 90 %

10 % to 90 %

 Pre flow

0 To 10 sec.

0 To 10 sec.

 Post flow

0 To 10 sec.

0 To 10 sec.

 Arc starter

Electronic pilot arc.

Electronic pilot arc.

 Open circuit voltage ( Pilot arc )

100 V DC to 120 V DC.

100 V DC to 120 V DC.

 Pilot arc current

2.0 Amps. DC to 5.0 Amps. DC.

2.0 Amps. DC to 5.0 Amps. DC.

 Duty cycle @ 40 deg.cel.Amb.

100 % at 120Amps.

100 % at 250Amps.

 Class of insulation

H class.

H class.

 Cooling

Forced Air Cooled for power source & chilling water for torch.

Forced Air Cooled for power source & chilling water for torch.

 Protection

IP-23.

IP-23.

 Pilot gas supply

Argon, 25 PSI at 0.5-5 ltrs./min.

Argon, 25 PSI at 0.5-5 ltrs./min.

 Shield gas supply

25 PSI at 1-15 ltrs/min pure argon or various mixtures as determined by desired arc characteristics. & metallurgy of the work material.

25 PSI at 1-20ltrs/min pure argon or various mixtures as determined by desired arc characteristics . & metallurgy of the work material.

 Weight

88 Kg. Approx.

143 Kg. Approx.

 External Dimensions (L. W. H.)

1120 mm. 550 mm. 465 mm.

1070 mm. 615 mm. 985 mm.

 

PLC with 7 ” touch screen coloured HMI with facility to store 50 Nos. welding programs.

PLC with 7 ” touch screen coloured HMI with facility to store 50 Nos. welding programs.

 

 

 

 

Klein Schweisser 400 Plasma
 
Details Klein Schweisser 400 Plasma
 Input supply 415 V AC, 1 Phase, 50Hz.
 Operating supply voltage range 370 V AC to 460 V AC.
 Input power 10.5 KVA at 400 Amps.
 Open circuit voltage ( Main arc ) 95 V DC to 105 V DC.
 Welding current range 5.0 Amps. DC to 400 Amps. DC.
 Welding current control Stepless with fine control.
 Base current 10 Amps. DC to 400 Amps. DC.
 Up slope 0 to 10 sec.
 Down slope 0 to 10 sec.
 Pulse frequency 1 Hz to 1000 Hz
 Pulse on time 10 % to 90 %
 Pre flow 0 To 10 sec.
 Post flow 0 To 10 sec.
 Arc starter Electronic pilot arc.
 Open circuit voltage ( Pilot arc ) 100 V DC to 120 V DC.
 Pilot arc current 2.0 Amps. DC to 5.0 Amps. DC.
 Duty cycle @ 40 deg.cel.Amb. 100 % at 250 Amps.
 Class of insulation H class.
 Cooling Forced air cool.
 Protection IP-21.
 Pilot gas supply Argon, 25 PSI at 0.5-5 ltrs./min.
 Shield gas supply 25 PSI at 1-20 ltrs/min pure argon or various mixtures as determined by desired arc char. & metallurgy of the work material.
 Weight 55 Kg. Approx.
 External Dimensions (L. W. H.) 1005mm. 500mm. 530mm.

 

Klein Schweisser 600 i 10 Plasma Welding
 
Details Klein Schweisser 600 i 10 Plasma Welding
 Input supply 415 Volts, 3 Phase, 50Hz.
 Operating supply voltage range 370 Volts AC to 460 V AC.
 Input power 22 KVA at full load.
 Pilot arc current range 5 Amps. DC to 20 Amps. DC.
 Pilot arc current control In steps of 0.01 Amps. (digital control).
 Main arc open circuit voltage 90 Volts DC.
 Pre flow 0 To 10 sec (In steps of 0.1 secs.).
 Post flow 0 To 30 sec (In steps of 0.1 secs.).
 Up slope timing 0 To 10 sec (In steps of 0.1 secs.).
 Down slope timing 0 To 10 sec (In steps of 0.1 secs.).
 Hot start 0 To 100% (In steps of 0.1%).
 Soft start 0 To 100% (In steps of 0.1%).
 Pulse frequency 0 To 1000 Hz (In steps of 0.1 Hz).
 Pulse frequency type Square wave / Sin wave / Triangular wave (with start & stop delay).
 Base current 0 To 600 Amps (In steps of 0.01 Amps).
 Pulse on time 0 To 100% (In steps of 0.1%).
 Mode Manual (2T/4T) / Semi auto / Fully auto / Direct mode / Test mode.
 CPU Modular Din rail type (Beckhoff Germany).
 Bus Terminals Modular fieldbus system (Beckhoff Germany).
 Communication ETHER CAT (Beckhoff Germany).
 Remote console Colour display with touch screen control.
 Class of Insulation H class.
 Duty cyvcle 70%.
 Protection IP - 21.
 Cooling Forced air cooled.
 Pilot Gas Argon (25 PSI at 0.5 - 5 Ltrs/min).
 Shield gas supply 25 PSI at 1-15 Ltrs/min pure argon or various mixtures as determined by desired arc char. & metallurgy of the work metal.

About Us

Electro Plasma Equipment's commitment to provided the most innovative, cost-effective, quality welding and cutting solutions is one that has guided the company for a long period of time. This, coupled with our technological leadership and worldwide manufacturing and distribution resources, enables us to provide competent and reliable solutions for each of our customers.

Read more...

Key Features

  1. retweet

    A Name You Can Trust!

  2. shield

    Safe & Reliable

  3. lightbulb

    24x7x365 Support & Assistance

  4. globe

    Worldwide Delivery

Real Support

Our techs are ALWAYS here! When you have an issue we are here to solve it immediately - 24 hours a day and 7 days a week. We are here for you!

Read more...

Locate Us

104 Acme Industrial Park, I. B. Patel Rd, Goregaon (E), Mumbai - 63, India.
Tel.: +91-22-4020 3456 / +91-22-2686 2843 / +91-22-2686 2893
Fax: +91-22-2686 5065
Email: sales@airplasma.com